Physio Control Lifepak 1000

Physio-Control Lifepak 1000 Features
The Physio-Control Lifepak 1000 is an easy-to-use automatic external defibrillator (AED) from the leader in defibrillation technology. But it’s also a defibrillator powerful and adaptable enough for professional responders, featuring advanced capabilities that can help improve lifesaving outcomes and speed the transition of cardiac patients to the next critical level of care. Not every cardiac emergency is the same. Neither is every responder. Your world demands flexibility—and that’s exactly what the Physio-Control Lifepak 1000 defibrillator delivers.

Rugged Construction – Rigorously drop-tested device and protective case and bumpers
Vehicle Friendly – Designed to ride along in any vehicle without damage from continuous vibrations and other movements
360 Joules – Can escalate defibrillation power to an industry-leading 360J
Carmax Technology – Minimizes CPR interruptions by allowing compressions to continue during AED charging
ECG Capability – 3-lead ECG function is available when needed
Shock Counter – Digitally records and displays delivered shocks for added insight

Physio-Control Lifepak 1000 Specifications
Display
Size (Active viewing area)
120 mm (4.7 in.) x 89 mm (3.5 in)
Display Type 320 dot x 240 dot LCD with backlight
Frequency Response 0.55 Hz to 21 Hz (-3 dB), nominal
Waveform Sweep Speed: 25 mm/sec for ECG, nominal
Waveform viewing time: Minimum 4 seconds
Waveform Amplitude 1 cm/mV, nominal
Display Range Differential: ±1.4 mV full scale, nominal
Heart Rate 20 to 300 BPM digital display
Display “—” if the heart rate is less than 20 BPM
Heart symbol flashes for each QRS detection
Displayed ECG ECG information is received from therapy pads in anterior-lateral or anterior-posterior positions, or from the 3-wire ECG cable in Lead II

ECG Mode
ECG Display Provides nondiagnostic ECG display of the patient’s heart rhythm.

Manual Mode
Energy Sequence Delivers energy at levels selected in Setup mode
Charge Time Charge time:
200 joules in less than 7 sec (typical)
360 joules in less than 12 sec (typical)

AED Mode
Shock Advisory System (SAS): ECG Analysis system that advises whether a shock is appropriate, meets rhythm recognition criteria specified in DF80 and IEC 60601-2-4. In AED mode, the device allows a shock only if SAS advises defibrillation. Shock Ready Time Time to first shock (electrodes connected to a patient at power on and initial rhythm finding is Shock Advised):
Less than 25 sec to 200 joules
Less than 30 sec to 360 joules
Energy Sequence: Multiple levels, configurable from 150 to 360 joules
Shock-to-Shock cycle time (200J to 300J):
Less than 25 seconds
Time for a 3-shock sequence (200J/300J/360J):
Less than 70 seconds
With Infant/Child Pads
The following specifications apply from 25 to 175 ohms
Energy Accuracy (into 50 ohms):
Selected energy ÷ 4 +/- 15%; 86 joules +/- 15% maximum

With Adult Pads
Patient Impedance Range: 10 – 300 ohms
The following specifications apply from 25 to 175 ohms.
Energy Accuracy
10% of the energy setting into 50 ohms
15% of the rated energy output into 25 – 175 ohms

Waveform
Biphasic Truncated Exponential with voltage and duration compensation for patient impedance.